ConcreteGauge

ConcreteGauge / Slab sizes / 30 × 30 ft

How much concrete for a 30 × 30 slab?

A 30 × 30 foot slab 4 inches thick takes 11.11 cubic yards of concrete. Buy 12.22 cubic yards to allow 10% for spills and uneven ground: 550 bags of 80 lb, or a 12.25 cubic yard ready-mix order.

What to buy for a 30 × 30 ft slab, 4 in thick

12.22 cubic yards

330 cubic feet, or 9.34 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 11.11 cubic yards.

Mix it from bags

550 bags of 80 lb

About $3,575.00. That is 44,000 lb to carry and mix.

Order ready-mix

12.25 cubic yards

About $1,837.50 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.

Best for this job: over one cubic yard, a truck saves a lot of mixing.

Bags needed, by bag size
40 lb bags1,100
50 lb bags880
60 lb bags734
80 lb bags550

The concrete weighs about 49,500 lb once poured.

The slab

30 ft30 ft4 in thick
Area
900 square feet (83.61 m²)
Round the edge
120 feet
Corner to corner
42 ft 5 1/8 in

Measure both diagonals of your forms. When each one reads 42 ft 5 1/8 in, the corners are square.

Change the size or thickness

A 30 × 30 slab at other thicknesses

Concrete for a 30 × 30 foot slab from 3 to 8 inches thick. The cubic yards and bags include 10% extra. The truck order is rounded up to the next quarter yard, and the weight is the finished slab.

ThickBuy, cu yd80 lb bagsTruck order, cu ydSlab weighs, lb
3 in9.174139.2533,750
4 in12.2255012.2545,000
5 in15.2868815.5056,250
6 in18.3382518.5067,500
8 in24.441,10024.5090,000

Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker, and the thickness of anything load-bearing is set by your local building code.

If this slab is a garage floor, the garage floor calculator asks the questions that job has and starts from its usual thickness.

Bags or a truck for a 30 × 30 slab?

At 4 inches thick this slab takes 12.22 cubic yards with the extra, so order 12.25 cubic yards of ready-mix. A full truck carries about 10 cubic yards, so that is 2 trucks, the last one carrying 2.25.

Tell the supplier it is one pour so the trucks arrive one after another. In bags it would be 550 bags of 80 lb, about 22 US tons, which is not a practical way to pour a slab this size. The truck load calculator lets you set your supplier’s truck size.

What the concrete costs

Concrete only, at example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, before delivery fees. Labor, forms, base and steel are not included.

ThicknessFrom bagsReady-mix
4 in$3,575.00550 bags$1,837.5012.25 yd$2.04 a sq ft
6 in$5,362.50825 bags$2,775.0018.5 yd$3.08 a sq ft

Prices differ a lot from one area to the next. Put your own in the concrete cost calculator.

The rest of the list for a 30 × 30 slab

What usually goes under, round and into a slab this size. Each amount includes 10% extra and is worked out for the settings in grey. Open an item’s calculator to change them.

30 ft30 ftDashed lines: joints

Not every slab needs every item. Whether yours needs steel, a vapor barrier or a thicker base depends on the ground, the load and your local code.

Questions people ask

How many yards of concrete do I need for a 30 × 30 slab?

A 30 × 30 foot slab 4 inches thick takes 11.11 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 12.22 cubic yards. At 6 inches thick it is 18.33 cubic yards with the same extra.

How many bags of concrete do I need for a 30 × 30 slab?

At 4 inches thick you need 550 bags of 80 lb or 734 bags of 60 lb, including 10% extra. At 6 inches thick you need 825 bags of 80 lb or 1,100 of 60 lb.

How much does the concrete for a 30 × 30 slab cost?

At example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, a 4 inch slab costs about $3,575.00 in bags or $1,837.50 in ready-mix before delivery fees. Prices vary a lot by area, so put your own in the cost calculator.

How much does a 30 × 30 concrete slab weigh?

About 45,000 lb at 4 inches thick and 67,500 lb at 6 inches, at 150 lb per cubic foot for normal concrete.

Does a 30 × 30 slab need control joints?

Yes. At 4 inches thick, joints should be no more than about 10 feet apart, so a 30 × 30 foot slab gets 4 joints, which divide it into 9 panels of 10 × 10 feet.

Where the numbers come from

Every number on this page is worked out by the same tested code as the calculators. Last reviewed 15 November 2026.

Sizes close to 30 × 30