ConcreteGauge

ConcreteGauge / Sealer

Concrete sealer calculator

Enter the area to seal, the coverage printed on your sealer and the number of coats. You get the gallons and the pails to buy.

Use the figure on your product’s label. Rough concrete takes more.

More options: extra for waste

Sealer to buy

4.4 gallons

For 400 square feet, 2 coats, at 200 square feet a gallon. Includes 10% extra for the roller, the tray and thirsty patches.

Buy 1 pail of 5 gallons.

Each coat takes 2 gallons before the extra. 16.7 litres in all.

20 ft20 ft

The formula

Gallons = area × coats ÷ square feet one gallon covers.

For a 20 × 20 foot slab, two coats, at 200 square feet a gallon: 400 × 2 ÷ 200 = 4 gallons. With 10% extra that is 4.4 gallons, so one 5 gallon pail.

Use the coverage on your label

No single coverage figure is right for every sealer. One maker of acrylic sealer recommends 200 square feet a gallon and allows 200 to 300; penetrating sealers for driveways can be as low as 90 to 150, and thin film-forming products reach 300 to 400. Rough or broom-finished concrete takes more than a smooth trowelled floor, and old dry concrete more than new.

Check also whether the label’s figure is for one coat or for the whole job. Some makers quote the area a gallon covers in two coats, which is half the per-coat figure. This calculator wants the figure for one coat.

Gallons by area

Two coats, with 10% extra, at three coverage rates.

Area100 sq ft per gal200 sq ft per gal300 sq ft per galTo buy at 200
100 sq ft2.2 gal1.1 gal0.7 gal2 × 1 gal
200 sq ft4.4 gal2.2 gal1.5 gal3 × 1 gal
400 sq ft8.8 gal4.4 gal2.9 gal1 × 5 gal
600 sq ft13.2 gal6.6 gal4.4 gal1 × 5 gal + 2 × 1 gal
800 sq ft17.6 gal8.8 gal5.9 gal2 × 5 gal
1,000 sq ft22 gal11 gal7.3 gal2 × 5 gal + 1 × 1 gal
1,500 sq ft33 gal16.5 gal11 gal3 × 5 gal + 2 × 1 gal
2,000 sq ft44 gal22 gal14.7 gal4 × 5 gal + 2 × 1 gal

Pails or cans?

Sealer is usually sold by the gallon and in 5 gallon pails, and the pail costs less per gallon. The calculator rounds up to whole gallons and suggests a pail once you would need four or more single cans. Keep one batch for one surface where you can: the sheen can differ slightly between batches.

When to seal

New concrete has to cure before most sealers go on, and the wait differs by product: some go on the same day as a curing aid, others ask for about a month. The label is the authority on timing, temperature and how long to leave between coats.

The area comes from the size of the slab; if you still have to pour it, start at the slab calculator. Joints are cut before sealing: see the control joint calculator.

Questions people ask

How much concrete sealer do I need?

Multiply the area by the number of coats and divide by the coverage on the label. For 400 square feet, two coats at 200 square feet a gallon, that is 4 gallons, or 4.4 with 10% extra.

How many square feet does a gallon of concrete sealer cover?

It depends on the product and the surface: from about 90 square feet for some penetrating sealers on porous concrete to 300 or 400 for thin coatings on smooth concrete. Around 200 per coat is a common label figure for acrylic sealers.

How much sealer for a 1,000 square foot driveway?

At 200 square feet a gallon and two coats, 11 gal including 10% extra: 2 × 5 gal + 1 × 1 gal. At 100 square feet a gallon it is 22 gal.

How many coats of sealer does concrete need?

Most makers recommend two thin coats. Follow the label: some penetrating sealers are applied once, wet on wet.

How far does a 5 gallon pail of sealer go?

At 200 square feet a gallon, a 5 gallon pail covers 1,000 square feet in one coat or 500 square feet in two.

Where the numbers come from

  • In metric countries the same coverage is shown as about 5 square metres a litre (200 square feet a US gallon is 4.9), and the answer in litres.
  • Acrylic sealer at 200, and 200 to 300, square feet a gallon: SealMaster, Concrete Sealer.
  • Range of coverage between products: Bob Vila, The Best Concrete Sealers, which lists each product’s stated coverage.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next