ConcreteGauge

ConcreteGauge / Block mortar

Mortar calculator for concrete block

Enter the wall and how the mortar is laid. You get the bags of pre-mixed mortar to buy, and the cement and sand if you mix your own.

The total area of the openings. Leave 0 for a solid wall.

For an 80 lb bag of pre-mixed mortar on face shells. Check your bag: figures run from about 9 to 13.

More options: extra for waste

Mortar to buy

17 bags of mortar mix, 80 lb

About 16.8 cubic feet of mortar for 198 blocks. Includes 10% extra for droppings and what dries on the board.

That is 1,360 lb to carry and mix.

Mixing your own from masonry cement and sand instead? Allow about 4 bags of masonry cement and 11.9 cubic feet of sand.

20 ft8 ft

How much mortar a block takes

Blocks are usually laid with mortar on the two long edges only, the face shells, and on the ends. Laid that way, 100 standard blocks take about 8.5 cubic feet of mortar. With mortar across the whole top of the block, a full bed, it is about 11 cubic feet.

Bags = number of blocks ÷ blocks one bag lays.

For a wall 20 feet long and 8 feet high: 180 blocks, 198 with 10% extra. At 12 blocks to an 80 lb bag that is 17 bags, about 16.8 cubic feet of mortar.

Why the bag figure is yours to set

How many blocks a bag lays depends on the joint thickness, how much falls off the trowel and the product itself. Guides put an 80 lb bag of pre-mixed mortar at anywhere from about 9 to 13 standard blocks. The calculator opens at 12; if the bag you are buying states a number, use that.

Be careful with the figure of “three bags per hundred blocks” that appears on many websites. It refers to bags of masonry cement, to which sand is added on site, not to bags of ready-mixed mortar. Applied to pre-mixed bags it leaves a wall several times short.

Mortar for common walls

Face-shell bedding, with 10% extra.

WallBlocksMortar80 lb bags of mixOr cement bags + sand
10 × 4 ft504.2 cu ft51 + 3 cu ft
20 × 4 ft998.4 cu ft92 + 5.9 cu ft
20 × 6 ft14912.6 cu ft133 + 8.9 cu ft
20 × 8 ft19816.8 cu ft174 + 11.9 cu ft
30 × 8 ft29725.2 cu ft255.9 + 17.8 cu ft
40 × 8 ft39633.7 cu ft337.9 + 23.8 cu ft
50 × 6 ft37231.6 cu ft317.4 + 22.3 cu ft
100 × 6 ft74363.1 cu ft6214.9 + 44.6 cu ft

Mixing your own

For a large wall, masonry cement and sand cost less than pre-mixed bags. Allow about 2 bags of masonry cement and 6 cubic feet of sand for every 100 blocks on face shells, or 2.5 bags and 7.5 cubic feet on a full bed: three cubic feet of sand to each bag.

The type of mortar, usually marked N or S on the bag, is a matter for your plans: walls below ground or holding back soil are normally built with the stronger type. Mix only what you can use in an hour or two; mortar that has started to stiffen should not be revived with water.

The count of blocks is on the concrete block calculator, and the grout that goes down the cores on the block fill calculator. Mortar and grout are different materials: mortar bonds the blocks, grout fills them.

Questions people ask

How many bags of mortar do I need for 100 blocks?

About 9 bags of 80 lb pre-mixed mortar at 12 blocks to the bag. If you mix your own, about 2 bags of masonry cement and 6 cubic feet of sand.

How many blocks does an 80 lb bag of mortar lay?

About 9 to 13 standard blocks on face shells, depending on the product and the joints. Use the figure printed on your bag where it gives one.

How much mortar for a 20 × 8 block wall?

About 16.8 cubic feet for 198 blocks, which is 17 bags of 80 lb mix at 12 blocks to the bag, including 10% extra.

Is it three bags of mortar per 100 blocks?

That figure is for bags of masonry cement mixed with sand on site. With bags of ready-mixed mortar, which already contain the sand, you need several times as many.

What is the difference between mortar and grout?

Mortar is stiff and sticks the blocks together. Grout is fluid and is poured into the cores to fill them, usually round steel bars.

Where the numbers come from

  • Outside the United States: a 20 kg bag makes about 11 litres of mortar (Heidelberg Materials in Britain; Cement Australia, which quotes about 10 blocks a bag). British guides disagree, from about 5 blocks a 25 kg bag (Wickes) to 20 blocks a 20 kg bag (Kebur), so the box opens at 10 and should be set from your own bag. In Canada a 30 kg bag makes about 18 litres and lays about 12 blocks (Quikrete, at Home Hardware).
  • Mortar per 100 blocks and the masonry cement and sand quantities: ToolGrit, CMU Block Estimating Guide.
  • Blocks per 80 lb bag of pre-mixed mortar: BuildingClub, Block CMU Calculator gives about 13.5; the ToolGrit calculator gives 8 to 9.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next