ConcreteGauge

ConcreteGauge / Sidewalk

Concrete sidewalk calculator

Enter the length of your walk, its width and its thickness to see the concrete to order.

Measured along the walk, around any bends.

Bag size
More options: several walks, extra for waste, prices

These are example prices. Change them to what your store and supplier charge.

What to buy

1.63 cubic yards

44 cubic feet, or 1.25 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 1.48 cubic yards.

Mix it from bags

74 bags of 80 lb

About $481.00. That is 5,920 lb to carry and mix.

Order ready-mix

1.75 cubic yards

About $262.50 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.

Best for this job: over one cubic yard, a truck saves a lot of mixing.

Bags needed, by bag size
40 lb bags147
50 lb bags118
60 lb bags98
80 lb bags74

The concrete weighs about 6,600 lb once poured.

30 ft4 ft4 in thick

How to measure a walk

  1. Measure the length along the walk itself. Follow the bends: a path that curves is longer than the straight line between its ends.
  2. Measure the width between the forms.
  3. If the walk changes width, or crosses a driveway where it must be thicker, split it there and work out each piece.

Concrete per foot of walk

A walk 4 feet wide and 4 inches thick takes 1.33 cubic feet for every foot of length. Cubic yards to buy for longer runs, 4 inches thick, with 10% extra already added:

Walk3 ft wide4 ft wide5 ft wide
10 ft long0.410.540.68
20 ft long0.811.091.36
30 ft long1.221.632.04
50 ft long2.042.723.40
75 ft long3.064.075.09
100 ft long4.075.436.79

Width and thickness

A path on your own land can be any width you like. A sidewalk along the street is different: it belongs to the city’s network and is built to the city’s standard. Those standards vary, but a common pattern is the one Sioux Falls publishes: 4 inches thick, 6 inches where the walk passes through a driveway, and at least 4 feet wide on local streets, 5 on busier ones.

Before replacing a public sidewalk, get your own city’s sheet. It will also say whether you need a permit and an inspection of the forms before you pour.

Where the walk crosses a driveway, a 12 foot stretch at 6 inches thick takes 26.4 cubic feet to buy instead of 17.6.

Pouring a long walk

A walk is narrow, so it is easy to pour in stages: form it all, then pour as far as one delivery or one day’s mixing reaches and stop at a joint. The 30 foot example on this page is 74 bags of 80 lb, more than most people want to mix; 1.75 cubic yards of ready-mix does it in one visit.

Steps along the way are on the steps calculator. Where the walk must slope up to a door, see the ramp calculator.

Questions people ask

How much concrete do I need for a sidewalk?

Length × width × thickness, in feet, divided by 27. A walk 30 feet long, 4 feet wide and 4 inches thick takes 1.48 cubic yards, or 1.63 with 10% extra.

How many yards of concrete for 100 feet of sidewalk?

5.43 cubic yards for a walk 4 feet wide and 4 inches thick, including 10% extra. At 3 feet wide it is 4.07 and at 5 feet wide 6.79.

How thick should a concrete sidewalk be?

City standards commonly ask for 4 inches, and 6 inches where the walk crosses a driveway. Sioux Falls is one published example. Your own city’s standard is the one that counts.

How wide is a normal sidewalk?

City standards commonly set at least 4 feet on local streets and 5 feet on busier ones. A private garden path can be narrower.

How far will one cubic yard go?

About 18 feet of walk 4 feet wide and 4 inches thick, after keeping 10% back for waste.

Where the numbers come from

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next