ConcreteGauge

ConcreteGauge / Slab

Concrete slab calculator

Enter your slab’s length, width and thickness to see how many cubic yards or bags of concrete to buy.

How deep the concrete will be.

Bag size
More options: several slabs, extra for waste, prices

These are example prices. Change them to what your store and supplier charge.

What to buy

1.36 cubic yards

36.67 cubic feet, or 1.04 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 1.23 cubic yards.

Mix it from bags

62 bags of 80 lb

About $403.00. That is 4,960 lb to carry and mix.

Order ready-mix

1.5 cubic yards

About $225.00 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.

Best for this job: over one cubic yard, a truck saves a lot of mixing.

Bags needed, by bag size
40 lb bags123
50 lb bags98
60 lb bags82
80 lb bags62

The concrete weighs about 5,500 lb once poured.

10 ft10 ft4 in thick

How to measure your slab

  1. Measure the length and the width of the area inside the forms, in feet.
  2. Measure the thickness at several spots. Ground that looks flat rarely is, so use the deepest reading or the average of them.
  3. Type the three numbers in. If the slab is not a rectangle, split it into rectangles, work each one out, and add the answers. For a circle, use the round slab calculator.
  4. Leave the extra for waste at 10% unless your forms and ground are very even.

Pouring one of these? Each has its own page with that job’s sizes and advice: driveway, patio, sidewalk, garage floor and shed base.

The formula

Length × width × thickness, all in feet, then divide by 27 for cubic yards.

Thickness is usually measured in inches, so divide it by 12 first. For a 10 × 10 foot slab 4 inches thick:

  • 4 inches ÷ 12 = 0.333 feet
  • 10 × 10 × 0.333 = 33.33 cubic feet
  • 33.33 ÷ 27 = 1.23 cubic yards
  • Add 10%: 1.36 cubic yards, or 62 bags of 80 lb

Common slab sizes

Concrete to buy for popular slab sizes, with 10% extra already added. Each size opens its own page with the cost, the weight and the rest of the shopping list, and the slab sizes table has more of them.

Slab4 inches thick6 inches thick
Cubic yards80 lb bagsCubic yards80 lb bags
4 × 4 ft0.22100.3315
8 × 8 ft0.87401.3059
8 × 10 ft1.09491.6374
10 × 10 ft1.36622.0492
10 × 12 ft1.63742.44110
12 × 12 ft1.96882.93132
12 × 16 ft2.611183.91176
16 × 16 ft3.481575.21235
20 × 20 ft5.432458.15367
24 × 24 ft7.8235211.73528

How thick should a slab be?

Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker.

The right thickness for anything load-bearing is set by your local building code, not by a calculator. Check with your building department before you order.

The rest of the shopping list

A slab is more than concrete. Count the other parts with the gravel base, form board, wire mesh or rebar, and control joint calculators.

Bags or a ready-mix truck?

Under about one cubic yard, bags are simpler: you buy what you need and mix at your own pace. One cubic yard is already 45 bags of 80 lb, which is 3,600 lb to carry and mix by hand.

Above that, ready-mix usually wins on effort and on the quality of the pour, because the whole slab goes down at once. Suppliers sell by the cubic yard and many add a fee for small loads, so ask for the delivered price before you compare. The cost calculator puts your own prices side by side, and the truck load calculator shows how many trucks a big pour needs.

Questions people ask

How much concrete do I need for a 10 × 10 slab?

A 10 × 10 foot slab that is 4 inches thick takes 1.23 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 1.36 cubic yards. At 6 inches thick it is 2.04 cubic yards with the same extra.

How many 80 lb bags of concrete do I need for a 10 × 10 slab?

At 4 inches thick you need 62 bags of 80 lb, including 10% extra. At 6 inches thick you need 92. That is a lot of mixing, which is why a slab this size is usually poured from a ready-mix truck.

How many bags of concrete are in a cubic yard?

One cubic yard is 45 bags of 80 lb, 60 bags of 60 lb, 72 bags of 50 lb or 90 bags of 40 lb. Brands differ a little, so check the yield printed on your bag.

How much extra concrete should I order?

Add 5 to 10%. The ground is never perfectly flat, forms bow a little, and some concrete stays in the mixer or the wheelbarrow. Running short halfway through a pour is far worse than having a little left over.

How much does a concrete slab weigh?

Normal concrete weighs about 150 lb per cubic foot, which is about 4,050 lb per cubic yard. A 10 × 10 foot slab 4 inches thick weighs about 5,000 lb.

Can I enter my slab in metres?

Yes. Each box has its own unit, so you can mix them: length and width in metres and thickness in millimetres, for example. The answer is shown in cubic yards, cubic feet and cubic metres.

Where the numbers come from

  • Standard residential slab thickness: Concrete Network.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next