ConcreteGauge / Mix ratio
Concrete mix ratio calculator
Enter how much concrete you need and choose a mix. You get the sacks of cement and the sand and gravel to buy.
What to buy
8 sacks of cement, 94 lb
To make 29.7 cubic feet, 1.1 cubic yards or 0.84 cubic metres of concrete at 1 : 2 : 3. Includes 10% extra for spills and uneven ground.
| Material | Volume | Also |
|---|---|---|
| Cement | 7.6 cu ft | 717 lb |
| Sand | 15.2 cu ft | 0.56 cu yd |
| Gravel | 22.9 cu ft | 0.85 cu yd |
An estimate for ordering, not a mix design. Add water a little at a time until the mix is workable.
What a mix ratio means
A ratio such as 1 : 2 : 3 is read as cement : sand : gravel, measured by volume. One bucket of cement, two of sand, three of gravel. Use the same bucket for all three and the ratio looks after itself.
In the United States a sack of portland cement weighs 94 lb and is counted as one cubic foot, so “one sack to two cubic feet of sand and three of gravel” is the same recipe.
How the amounts are worked out
Six cubic feet of loose materials do not make six cubic feet of concrete. The sand fills the gaps between the stones and the cement paste fills the gaps in the sand, so the mix shrinks. The usual allowance is to buy 1.54 times the finished volume in loose materials.
Finished volume × 1.54, shared out by the parts of the mix.
For one cubic yard (27 cubic feet) at 1 : 2 : 3:
- 27 × 1.54 = 41.58 cubic feet of loose materials
- Cement, 1 part in 6: 6.93 cubic feet, so 7 sacks
- Sand, 2 parts in 6: 13.86 cubic feet
- Gravel, 3 parts in 6: 20.79 cubic feet
With 10% extra, as the calculator opens, that becomes 8 sacks, 15.2 cubic feet of sand and 22.9 of gravel.
The 1.54 is a rule of thumb, not a law. The real figure depends on how damp the sand is and the size and shape of the stone, which is why published tables for the same mix disagree with each other. Treat the answer as an amount to order, with a little spare, and change the factor if your supplier gives you a better one.
Materials per cubic yard
For one cubic yard of finished concrete, before any extra for waste.
| Mix | Cement, 94 lb sacks | Sand | Gravel |
|---|---|---|---|
| 1 : 2 : 3 | 6.9 | 13.9 cu ft | 20.8 cu ft |
| 1 : 2 : 4 | 5.9 | 11.9 cu ft | 23.8 cu ft |
| 1 : 1.5 : 3 | 7.6 | 11.3 cu ft | 22.7 cu ft |
| 1 : 3 : 6 | 4.2 | 12.5 cu ft | 24.9 cu ft |
Choosing a mix
More cement in proportion makes stronger concrete, so 1 : 1.5 : 3 is richer than 1 : 2 : 3, and 1 : 3 : 6 is a lean mix for filling and bedding. But the water matters as much as the ratio: every extra splash that makes the mix easier to pour also makes it weaker. Add water a little at a time and stop when the mix holds its shape.
The strength a job needs is set by its design or your local code, and a ratio by the bucket cannot promise a strength. For anything structural, order ready-mix to a stated strength instead.
Bags of pre-mixed concrete already contain the sand and gravel: count those with the bag calculator. To compare the price against a delivery, see the cost calculator.
Questions people ask
How many bags of cement do I need for a yard of concrete?
About 7 sacks of 94 lb at 1 : 2 : 3, using the usual 1.54 dry volume allowance. A richer 1 : 1.5 : 3 mix takes about 7.6 and a lean 1 : 3 : 6 mix about 4.2.
What is the 1 : 2 : 3 concrete mix?
One part cement, two parts sand and three parts gravel, measured by volume, plus water. It is the common general-purpose mix for home projects.
How much sand and gravel do I need for a cubic yard of concrete?
At 1 : 2 : 3, about 13.9 cubic feet of sand and 20.8 cubic feet of gravel, which is about half a cubic yard of sand and three quarters of a yard of gravel.
Why multiply by 1.54?
Because loose dry materials take up more room than the concrete they make. The gaps between particles close up when everything is mixed with water. 1.54 is the commonly used allowance; real mixes vary a little.
How much water do I add?
This page does not give a figure, because the right amount depends on how wet your sand already is. Add water gradually until the mix is workable but not soupy. Less water makes stronger concrete.
Where the numbers come from
- One sack of cement is 94 lb and one cubic foot: GlobalSpec, Building Structures Review.
- The 1.54 dry volume allowance: Calculator Academy, Concrete Mix Calculator. It is a rule of thumb, and the calculator lets you change it.
- Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
- Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
- Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).
Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.