ConcreteGauge

ConcreteGauge / Block fill

Concrete block fill calculator

Enter the wall, the thickness of the block and how many of the cores you are filling. You get the grout in cubic yards and in bags.

The total area of the openings. Leave 0 for a solid wall.

More options: extra for waste

Grout to buy

1.83 cubic yards of grout

49.5 cubic feet, to fill every core in 180 blocks of 8 inches. Includes 10% extra for spills and uneven cores.

83 bags of 80 lb, if you fill from bags.

One 8 inch block takes about 0.25 cubic feet to fill both cores. Over a cubic yard is usually ordered as ready-mixed grout and pumped.

20 ft8 ft

The formula

Grout = number of blocks × what one block’s cores hold × the share of cores filled.

For a wall 20 feet long and 8 feet high in 8 inch block, every core filled:

  • 180 blocks × 0.25 cubic feet = 45 cubic feet
  • 45 ÷ 27 = 1.67 cubic yards
  • Add 10%: 1.83 cubic yards, or 83 bags of 80 lb

What one block holds

BlockBoth coresPer 100 blocksPer 100 sq ft of wall80 lb bags per 100 blocks
6 in block0.17 cu ft0.63 yd0.71 yd29
8 in block0.25 cu ft0.93 yd1.04 yd42
10 in block0.33 cu ft1.22 yd1.38 yd55
12 in block0.42 cu ft1.56 yd1.75 yd70

These are averages. Blocks from different makers have thicker or thinner walls, and the mortar that squeezes into the cores takes up a little room, so treat the answer as an amount to order with some to spare. Published figures for core fill vary a great deal from one website to the next; the ones here come from a block maker’s estimating guide and are cross-checked against a second source.

Grout for common walls

8 inch block, with 10% extra.

WallBlocksEvery coreEvery second coreEvery fourth core
10 × 4 ft450.46 yd0.23 yd0.11 yd
20 × 4 ft900.92 yd0.46 yd0.23 yd
20 × 6 ft1351.38 yd0.69 yd0.34 yd
20 × 8 ft1801.83 yd0.92 yd0.46 yd
30 × 8 ft2702.75 yd1.38 yd0.69 yd
40 × 8 ft3603.67 yd1.83 yd0.92 yd
50 × 6 ft3383.44 yd1.72 yd0.86 yd
100 × 6 ft6756.88 yd3.44 yd1.72 yd

Every core, or only some?

In a reinforced wall the cores that hold a steel bar are filled, and the bars are spaced along the wall as the design requires. Bars every 16 inches put steel in every second core; every 32 inches, every fourth. A wall filled solid is used where the design calls for it, such as below ground or to hold back soil.

Which cores to fill, and with what steel, is set by your plans or your building department. Enter what they say.

Grout or concrete?

Cores are filled with grout: a fluid mix made to flow down a narrow core and round the steel without leaving gaps. Ordinary bagged concrete is stiffer and its stone is larger, so it can bridge and leave voids in a tall lift. For a low garden wall bagged concrete is often used; for a structural wall, use the grout the plans specify. The bag count on this page uses the yield of an 80 lb bag of concrete mix, about 0.6 cubic feet: check the yield on a bag of grout if you buy that.

The number of blocks comes from the concrete block calculator, and the mortar between them from the block mortar calculator.

Questions people ask

How much concrete does it take to fill a concrete block?

About 0.25 cubic feet for both cores of a standard 8 inch block, 0.17 for a 6 inch block and about 0.42 for a 12 inch block.

How many blocks will a yard of concrete fill?

About 100 blocks of 8 inches, 120 of 6 inches or 65 of 12 inches, with every core filled.

How many bags of concrete to fill 100 blocks?

About 42 bags of 80 lb for 8 inch block with every core filled, at 0.6 cubic feet a bag. Half that if every second core is filled.

How much grout for a 20 × 8 block wall?

For 8 inch block filled solid, 1.67 cubic yards, or 1.83 with 10% extra. With every second core filled, half of that.

Do all the cores have to be filled?

Only if the design says so. Many reinforced walls fill just the cores that carry steel. A plain garden wall may have none filled.

Where the numbers come from

  • Australia and New Zealand: 0.0044, 0.0064 and 0.0120 cubic metres of grout fill one 150, 200 and 300 series block (BCP Building Products). Canadian blocks share the American module, so the American figures are used, named in centimetres. Britain and Ireland are not offered here: no maker’s core volumes for their blocks were found, and a guess would be worse than nothing.
  • Core fill for 6 and 8 inch block: Titan America, Block Estimating Guide.
  • Core fill for 10 and 12 inch block, and blocks filled per cubic yard: Inch Calculator, Concrete Block Fill Calculator.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next