ConcreteGauge

ConcreteGauge / Weight

Concrete weight calculator

Enter the size of the concrete, or its volume, to see what it weighs in pounds, tons and kilograms.

Normal concrete is about 150 lb per cubic foot, or 2,400 kg per cubic metre. Lightweight mixes are lighter.

What it weighs

5,000 lb

2.5 US tons, or 2,268 kg. For 33.33 cubic feet (1.23 cubic yards) at 150 lb per cubic foot.

50 lb on every square foot.

This is the weight of the hardened concrete itself, with no extra for waste. Steel inside it adds a little.

10 ft10 ft4 in thick

The formula

Volume in cubic feet × 150 lb.

For a 10 × 10 foot slab 4 inches thick: 10 × 10 × 0.333 = 33.33 cubic feet, and 33.33 × 150 = about 5,000 lb. That is 50 lb on every square foot.

What concrete weighs

Normal concretePoundsKilograms
1 cubic foot150 lb68 kg
1 cubic yard4,050 lb1,837 kg
1 cubic metre5,297 lb2,403 kg

These use 150 lb per cubic foot. Normal concrete runs from about 140 to 150 depending on the stone in it, so treat any answer as good to within a few percent. Lightweight concrete, made with porous aggregate, is 90 to 115 lb per cubic foot: change the weight box above if that is what you have.

Weight per square foot by thickness

SlabNormal, 150 lb/cu ftLightweight, 110 lb/cu ft
2 in thick25 lb18.3 lb
3 in thick37.5 lb27.5 lb
4 in thick50 lb36.7 lb
5 in thick62.5 lb45.8 lb
6 in thick75 lb55 lb
8 in thick100 lb73.3 lb
10 in thick125 lb91.7 lb
12 in thick150 lb110 lb

When the weight matters

  • On a floor or a deck: the weight per square foot is what to give an engineer or the building department. Concrete on anything but the ground needs their sign-off.
  • Hauling old concrete: broken concrete weighs the same as it did in place. Check a trailer’s or skip’s limit against the total, not against how full it looks.
  • Lifting a precast piece: use the total, and remember steps, lintels and countertops are heavier than they look.

Wet concrete weighs slightly more than cured concrete because some mixing water later dries out. For forms and trucks, the figure here is close enough. For the load a truck brings, see the truck load calculator; for bag weights to carry, the bag calculator.

Questions people ask

How much does a cubic yard of concrete weigh?

About 4,050 lb, or roughly 2 US tons, at 150 lb per cubic foot.

How much does a cubic foot of concrete weigh?

About 150 lb for normal concrete. The range is roughly 140 to 150 lb depending on the aggregate; lightweight concrete is 90 to 115 lb.

How much does a 4 inch concrete slab weigh per square foot?

50 lb per square foot. A 6 inch slab is 75 lb per square foot.

How much does a 10 × 10 concrete slab weigh?

About 5,000 lb at 4 inches thick, or 2.5 US tons. At 6 inches thick it is about 7,500 lb.

Does reinforced concrete weigh more?

A little. Steel is much denser than concrete, but there is not much of it in a typical slab, so the usual 150 lb per cubic foot is often used for reinforced concrete as it stands.

Where the numbers come from

  • Normal concrete at 140 to 150 and lightweight at 90 to 115 lb per cubic foot: County Materials, Lightweight Concrete.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next