ConcreteGauge

ConcreteGauge / Form boards

Concrete form board calculator

Enter the size of the slab, the length of board you will buy and how far apart the stakes go. You get the boards and stakes to buy.

Closer for taller forms and wetter concrete.

More options: extra for waste

Forms to buy

5 boards, 12 ft long

For 44 feet of form. Includes 10% extra for cuts and joins.

19 stakes: one about every 3 feet, plus the corners.

Add a stake wherever two boards meet end to end, and screws or double-headed nails to fix the boards to the stakes.

12 ft10 ftBrown: boards

How the forms are counted

Feet of form = the length of every side you are forming. Boards = feet of form ÷ board length, rounded up.

For a 12 × 10 foot slab formed on all four sides: 12 + 10 + 12 + 10 = 44 feet. With 10% extra that is 48.4 feet, or 5 boards of 12 feet. Stakes every 3 feet come to 15, plus one at each corner: 19.

If one long side is a house wall or an existing slab, choose three sides: the same slab then needs 32 feet of form.

Boards and stakes for common slabs

Four sides formed, 10% extra on the boards, stakes every 3 feet.

SlabForm8 ft boards12 ft boards16 ft boardsStakes
10 × 10 ft40 ft64318
12 × 12 ft48 ft75420
12 × 16 ft56 ft86423
16 × 20 ft72 ft107528
20 × 20 ft80 ft118631
24 × 24 ft96 ft149736
24 × 30 ft108 ft1510840
30 × 40 ft140 ft20131051

Which board for which slab?

The board has to be as tall as the slab is thick. Timber is smaller than its name: a 2 × 4 is 3.5 inches tall and a 2 × 6 is 5.5 inches. So a 2 × 4 forms a slab poured 3.5 inches thick, or 4 inches if the board is set half an inch off the ground, and a 2 × 6 forms a slab of up to 5.5 or 6 inches the same way.

Longer boards mean fewer joins, and every join is a place the form can step out of line. Buy the longest boards you can carry home and that suit your sides: a 12 foot side wants a 12 foot board, not an 8 and a 4.

Stakes and bracing

Wet concrete pushes outward on the forms, harder the deeper it is. Stakes on the outside hold the line. Set one at every corner, one wherever two boards meet, and the rest at your spacing: closer together for a thicker slab. Drive them below the top of the board so the screed can pass over them.

Curved edges are formed with thin flexible board or hardboard and need many more stakes: enter a closer spacing for those runs.

Once the forms are set, their inside measurements are what the concrete is ordered from: take those to the slab calculator. The gravel base calculator covers what goes down before the pour.

Questions people ask

How many form boards do I need for a 10 × 10 slab?

The forms run 40 feet. With 10% extra that is 4 boards of 12 feet or 6 boards of 8 feet, and 18 stakes at 3 feet apart.

What size lumber do I use for concrete forms?

A board as tall as the slab is thick. A 2 × 4, which is really 3.5 inches tall, suits a slab of about 4 inches; a 2 × 6, really 5.5 inches, suits one of about 6 inches.

How far apart should form stakes be?

Close enough that the boards cannot bow when the concrete pushes on them. The calculator opens at 3 feet; use less for thicker slabs, thin boards or curves.

Do I form all four sides?

Only the sides with nothing to pour against. Where the slab meets a wall or an existing slab, that side needs an expansion strip, not a board.

Can I reuse form boards?

Yes. Boards stripped a day or two after the pour and cleaned can be used again, as forms or as ordinary timber.

Where the numbers come from

  • Outside the United States the board length opens at 3.6 m, and at 12 ft in Canada. It is only a starting point: change it to the boards you buy.
  • Timber sizes: a 2 × 4 is 1.5 × 3.5 inches and a 2 × 6 is 1.5 × 5.5 inches once dried and planed, which is why board height and slab thickness do not match the names. No code figures are used on this page.
  • Bag yields: a 40 lb bag makes about 0.3 cubic feet, 50 lb about 0.375, 60 lb about 0.45 and 80 lb about 0.6 (ArcSite, Concrete Network). Brands differ a little, so check the yield printed on your bag.
  • Bag yields outside the United States: in the United Kingdom and Ireland a 20 kg bag makes about 0.01 cubic metres (Blue Circle, at Travis Perkins); in Australia and New Zealand 108 bags of 20 kg make a cubic metre (Boral); in Canada a 30 kg bag makes about 0.44 cubic feet (Quikrete, at Home Depot Canada). The 25 kg figures are worked out in proportion.
  • Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).

Every formula on this page is checked by an automatic test each time the site is updated. Last reviewed 15 November 2026.

What you may need next