ConcreteGauge

ConcreteGauge / Slab sizes / 20 × 40 ft

How much concrete for a 20 × 40 slab?

A 20 × 40 foot slab 4 inches thick takes 9.88 cubic yards of concrete. Buy 10.86 cubic yards to allow 10% for spills and uneven ground: 489 bags of 80 lb, or a 11 cubic yard ready-mix order.

What to buy for a 20 × 40 ft slab, 4 in thick

10.86 cubic yards

293.33 cubic feet, or 8.31 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 9.88 cubic yards.

Mix it from bags

489 bags of 80 lb

About $3,178.50. That is 39,120 lb to carry and mix.

Order ready-mix

11 cubic yards

About $1,650.00 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.

Best for this job: over one cubic yard, a truck saves a lot of mixing.

Bags needed, by bag size
40 lb bags978
50 lb bags783
60 lb bags652
80 lb bags489

The concrete weighs about 44,000 lb once poured.

The slab

40 ft20 ft4 in thick
Area
800 square feet (74.32 m²)
Round the edge
120 feet
Corner to corner
44 ft 8 5/8 in

Measure both diagonals of your forms. When each one reads 44 ft 8 5/8 in, the corners are square.

Change the size or thickness

A 20 × 40 slab at other thicknesses

Concrete for a 20 × 40 foot slab from 3 to 8 inches thick. The cubic yards and bags include 10% extra. The truck order is rounded up to the next quarter yard, and the weight is the finished slab.

ThickBuy, cu yd80 lb bagsTruck order, cu ydSlab weighs, lb
3 in8.153678.2530,000
4 in10.8648911.0040,001
5 in13.5861213.7550,000
6 in16.3073416.5060,000
8 in21.7397821.7580,000

Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker, and the thickness of anything load-bearing is set by your local building code.

If this slab is a driveway or a garage floor, the driveway calculator and the garage floor calculator ask the questions that job has and start from its usual thickness.

Bags or a truck for a 20 × 40 slab?

At 4 inches thick this slab takes 10.86 cubic yards with the extra, so order 11 cubic yards of ready-mix. A full truck carries about 10 cubic yards, so that is 2 trucks, the last one carrying 1.

Tell the supplier it is one pour so the trucks arrive one after another. In bags it would be 489 bags of 80 lb, about 19.56 US tons, which is not a practical way to pour a slab this size. The truck load calculator lets you set your supplier’s truck size.

What the concrete costs

Concrete only, at example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, before delivery fees. Labor, forms, base and steel are not included.

ThicknessFrom bagsReady-mix
4 in$3,178.50489 bags$1,650.0011 yd$2.06 a sq ft
6 in$4,771.00734 bags$2,475.0016.5 yd$3.09 a sq ft

Prices differ a lot from one area to the next. Put your own in the concrete cost calculator.

The rest of the list for a 20 × 40 slab

What usually goes under, round and into a slab this size. Each amount includes 10% extra and is worked out for the settings in grey. Open an item’s calculator to change them.

40 ft20 ftDashed lines: joints

Not every slab needs every item. Whether yours needs steel, a vapor barrier or a thicker base depends on the ground, the load and your local code.

Questions people ask

How many yards of concrete do I need for a 20 × 40 slab?

A 20 × 40 foot slab 4 inches thick takes 9.88 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 10.86 cubic yards. At 6 inches thick it is 16.3 cubic yards with the same extra.

How many bags of concrete do I need for a 20 × 40 slab?

At 4 inches thick you need 489 bags of 80 lb or 652 bags of 60 lb, including 10% extra. At 6 inches thick you need 734 bags of 80 lb or 978 of 60 lb.

How much does the concrete for a 20 × 40 slab cost?

At example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, a 4 inch slab costs about $3,178.50 in bags or $1,650.00 in ready-mix before delivery fees. Prices vary a lot by area, so put your own in the cost calculator.

How much does a 20 × 40 concrete slab weigh?

About 40,001 lb at 4 inches thick and 60,000 lb at 6 inches, at 150 lb per cubic foot for normal concrete.

Does a 20 × 40 slab need control joints?

Yes. At 4 inches thick, joints should be no more than about 10 feet apart, so a 20 × 40 foot slab gets 4 joints, which divide it into 8 panels of 10 × 10 feet.

Where the numbers come from

Every number on this page is worked out by the same tested code as the calculators. Last reviewed 15 November 2026.

Sizes close to 20 × 40