ConcreteGauge / Slab sizes / 24 × 30 ft
How much concrete for a 24 × 30 slab?
A 24 × 30 foot slab 4 inches thick takes 8.89 cubic yards of concrete. Buy 9.78 cubic yards to allow 10% for spills and uneven ground: 440 bags of 80 lb, or a 10 cubic yard ready-mix order.
What to buy for a 24 × 30 ft slab, 4 in thick
9.78 cubic yards
264 cubic feet, or 7.48 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 8.89 cubic yards.
Mix it from bags
440 bags of 80 lb
About $2,860.00. That is 35,200 lb to carry and mix.
Order ready-mix
10 cubic yards
About $1,500.00 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.
Best for this job: over one cubic yard, a truck saves a lot of mixing.
| 40 lb bags | 880 |
|---|---|
| 50 lb bags | 704 |
| 60 lb bags | 587 |
| 80 lb bags | 440 |
The concrete weighs about 39,600 lb once poured.
The slab
- Area
- 720 square feet (66.89 m²)
- Round the edge
- 108 feet
- Corner to corner
- 38 ft 5 in
Measure both diagonals of your forms. When each one reads 38 ft 5 in, the corners are square.
A 24 × 30 slab at other thicknesses
Concrete for a 24 × 30 foot slab from 3 to 8 inches thick. The cubic yards and bags include 10% extra. The truck order is rounded up to the next quarter yard, and the weight is the finished slab.
| Thick | Buy, cu yd | 80 lb bags | Truck order, cu yd | Slab weighs, lb |
|---|---|---|---|---|
| 3 in | 7.33 | 330 | 7.50 | 27,000 |
| 4 in | 9.78 | 440 | 10.00 | 36,000 |
| 5 in | 12.22 | 550 | 12.25 | 45,000 |
| 6 in | 14.67 | 660 | 14.75 | 54,000 |
| 8 in | 19.56 | 880 | 19.75 | 72,000 |
Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker, and the thickness of anything load-bearing is set by your local building code.
If this slab is a garage floor, the garage floor calculator asks the questions that job has and starts from its usual thickness.
Bags or a truck for a 24 × 30 slab?
At 4 inches thick this slab takes 9.78 cubic yards with the extra, so order 10 cubic yards of ready-mix. That fits on one truck: a full truck carries about 10 cubic yards.
From bags it would be 440 bags of 80 lb, which is 35,200 lb (17.6 US tons) to lift and mix. At this size bags are not practical: the first batches would be setting before the last were mixed.
What the concrete costs
Concrete only, at example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, before delivery fees. Labor, forms, base and steel are not included.
| Thickness | From bags | Ready-mix |
|---|---|---|
| 4 in | $2,860.00440 bags | $1,500.0010 yd$2.08 a sq ft |
| 6 in | $4,290.00660 bags | $2,212.5014.75 yd$3.07 a sq ft |
Prices differ a lot from one area to the next. Put your own in the concrete cost calculator.
The rest of the list for a 24 × 30 slab
What usually goes under, round and into a slab this size. Each amount includes 10% extra and is worked out for the settings in grey. Open an item’s calculator to change them.
- Gravel base13.9 US tons (9.78 cubic yards)4 in deep, crushed stone
- Form boards10 boards and 40 stakes12 ft boards round all four sides
- Rebar86 bars (1,715 ft)#4 bars, 20 ft long, 12 in apart both ways
- Wire mesh, instead of rebar19 sheets5 × 10 ft sheets, overlapped 6 in
- Vapor barrier1 roll, laid in 3 strips10 × 100 ft rolls
- Control joints4 joints to cut, 108 ft in all, making 9 panels of 10 × 8 ftJoints up to 10 ft apart
- Sealer7.9 gallons: 1 pail of 5 gallons and 3 cans of 1 gallon2 coats at 200 sq ft a gallon
Not every slab needs every item. Whether yours needs steel, a vapor barrier or a thicker base depends on the ground, the load and your local code.
Questions people ask
How many yards of concrete do I need for a 24 × 30 slab?
A 24 × 30 foot slab 4 inches thick takes 8.89 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 9.78 cubic yards. At 6 inches thick it is 14.67 cubic yards with the same extra.
How many bags of concrete do I need for a 24 × 30 slab?
At 4 inches thick you need 440 bags of 80 lb or 587 bags of 60 lb, including 10% extra. At 6 inches thick you need 660 bags of 80 lb or 880 of 60 lb.
How much does the concrete for a 24 × 30 slab cost?
At example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, a 4 inch slab costs about $2,860.00 in bags or $1,500.00 in ready-mix before delivery fees. Prices vary a lot by area, so put your own in the cost calculator.
How much does a 24 × 30 concrete slab weigh?
About 36,000 lb at 4 inches thick and 54,000 lb at 6 inches, at 150 lb per cubic foot for normal concrete.
Does a 24 × 30 slab need control joints?
Yes. At 4 inches thick, joints should be no more than about 10 feet apart, so a 24 × 30 foot slab gets 4 joints, which divide it into 9 panels of 10 × 8 feet.
Where the numbers come from
- Volume: length × width × thickness, in feet, divided by 27 for cubic yards. For this slab at 4 inches: 30 × 24 × 0.333 = 240 cubic feet, or 8.89 cubic yards.
- Bag yields: an 80 lb bag makes about 0.6 cubic feet and a 60 lb bag about 0.45 (ArcSite). Brands differ a little, so check the yield printed on your bag.
- Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).
- Standard residential slab thickness: Concrete Network.
- Truck size: about 10 cubic yards for a full ready-mix truck (HomeGuide). Suppliers differ.
- Gravel: 105 lb per cubic foot for crushed stone (Select Sand & Gravel).
- Control joints: spaced up to 2.5 times the slab thickness in inches, read as feet (Concrete Network).
- Mesh and membrane overlap: 6 inches (DG Floors). Sealer coverage: 200 square feet a gallon (SealMaster); the label on your product decides.
Every number on this page is worked out by the same tested code as the calculators. Last reviewed 15 November 2026.