ConcreteGauge / Slab sizes / 30 × 50 ft
How much concrete for a 30 × 50 slab?
A 30 × 50 foot slab 4 inches thick takes 18.52 cubic yards of concrete. Buy 20.37 cubic yards to allow 10% for spills and uneven ground: 917 bags of 80 lb, or a 20.5 cubic yard ready-mix order.
What to buy for a 30 × 50 ft slab, 4 in thick
20.37 cubic yards
550 cubic feet, or 15.57 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 18.52 cubic yards.
Mix it from bags
917 bags of 80 lb
About $5,960.50. That is 73,360 lb to carry and mix.
Order ready-mix
20.5 cubic yards
About $3,075.00 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.
Best for this job: over one cubic yard, a truck saves a lot of mixing.
| 40 lb bags | 1,834 |
|---|---|
| 50 lb bags | 1,467 |
| 60 lb bags | 1,223 |
| 80 lb bags | 917 |
The concrete weighs about 82,500 lb once poured.
The slab
- Area
- 1,500 square feet (139.35 m²)
- Round the edge
- 160 feet
- Corner to corner
- 58 ft 3 3/4 in
Measure both diagonals of your forms. When each one reads 58 ft 3 3/4 in, the corners are square.
A 30 × 50 slab at other thicknesses
Concrete for a 30 × 50 foot slab from 3 to 8 inches thick. The cubic yards and bags include 10% extra. The truck order is rounded up to the next quarter yard, and the weight is the finished slab.
| Thick | Buy, cu yd | 80 lb bags | Truck order, cu yd | Slab weighs, lb |
|---|---|---|---|---|
| 3 in | 15.28 | 688 | 15.50 | 56,250 |
| 4 in | 20.37 | 917 | 20.50 | 75,000 |
| 5 in | 25.46 | 1,146 | 25.50 | 93,750 |
| 6 in | 30.56 | 1,375 | 30.75 | 112,500 |
| 8 in | 40.74 | 1,834 | 40.75 | 150,000 |
Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker, and the thickness of anything load-bearing is set by your local building code.
If this slab is a garage floor, the garage floor calculator asks the questions that job has and starts from its usual thickness.
Bags or a truck for a 30 × 50 slab?
At 4 inches thick this slab takes 20.37 cubic yards with the extra, so order 20.5 cubic yards of ready-mix. A full truck carries about 10 cubic yards, so that is 3 trucks, the last one carrying 0.5.
Tell the supplier it is one pour so the trucks arrive one after another. In bags it would be 917 bags of 80 lb, about 36.68 US tons, which is not a practical way to pour a slab this size. The truck load calculator lets you set your supplier’s truck size.
What the concrete costs
Concrete only, at example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, before delivery fees. Labor, forms, base and steel are not included.
| Thickness | From bags | Ready-mix |
|---|---|---|
| 4 in | $5,960.50917 bags | $3,075.0020.5 yd$2.05 a sq ft |
| 6 in | $8,937.501,375 bags | $4,612.5030.75 yd$3.08 a sq ft |
Prices differ a lot from one area to the next. Put your own in the concrete cost calculator.
The rest of the list for a 30 × 50 slab
What usually goes under, round and into a slab this size. Each amount includes 10% extra and is worked out for the settings in grey. Open an item’s calculator to change them.
- Gravel base28.9 US tons (20.37 cubic yards)4 in deep, crushed stone
- Form boards15 boards and 58 stakes12 ft boards round all four sides
- Rebar178 bars (3,550 ft)#4 bars, 20 ft long, 12 in apart both ways
- Wire mesh, instead of rebar39 sheets5 × 10 ft sheets, overlapped 6 in
- Vapor barrier3 rolls, laid in 4 strips10 × 100 ft rolls
- Control joints6 joints to cut, 220 ft in all, making 15 panels of 10 × 10 ftJoints up to 10 ft apart
- Sealer16.5 gallons: 3 pails of 5 gallons and 2 cans of 1 gallon2 coats at 200 sq ft a gallon
Not every slab needs every item. Whether yours needs steel, a vapor barrier or a thicker base depends on the ground, the load and your local code.
Questions people ask
How many yards of concrete do I need for a 30 × 50 slab?
A 30 × 50 foot slab 4 inches thick takes 18.52 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 20.37 cubic yards. At 6 inches thick it is 30.56 cubic yards with the same extra.
How many bags of concrete do I need for a 30 × 50 slab?
At 4 inches thick you need 917 bags of 80 lb or 1,223 bags of 60 lb, including 10% extra. At 6 inches thick you need 1,375 bags of 80 lb or 1,834 of 60 lb.
How much does the concrete for a 30 × 50 slab cost?
At example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, a 4 inch slab costs about $5,960.50 in bags or $3,075.00 in ready-mix before delivery fees. Prices vary a lot by area, so put your own in the cost calculator.
How much does a 30 × 50 concrete slab weigh?
About 75,000 lb at 4 inches thick and 112,500 lb at 6 inches, at 150 lb per cubic foot for normal concrete.
Does a 30 × 50 slab need control joints?
Yes. At 4 inches thick, joints should be no more than about 10 feet apart, so a 30 × 50 foot slab gets 6 joints, which divide it into 15 panels of 10 × 10 feet.
Where the numbers come from
- Volume: length × width × thickness, in feet, divided by 27 for cubic yards. For this slab at 4 inches: 50 × 30 × 0.333 = 500 cubic feet, or 18.52 cubic yards.
- Bag yields: an 80 lb bag makes about 0.6 cubic feet and a 60 lb bag about 0.45 (ArcSite). Brands differ a little, so check the yield printed on your bag.
- Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).
- Standard residential slab thickness: Concrete Network.
- Truck size: about 10 cubic yards for a full ready-mix truck (HomeGuide). Suppliers differ.
- Gravel: 105 lb per cubic foot for crushed stone (Select Sand & Gravel).
- Control joints: spaced up to 2.5 times the slab thickness in inches, read as feet (Concrete Network).
- Mesh and membrane overlap: 6 inches (DG Floors). Sealer coverage: 200 square feet a gallon (SealMaster); the label on your product decides.
Every number on this page is worked out by the same tested code as the calculators. Last reviewed 15 November 2026.