ConcreteGauge / Slab sizes / 10 × 20 ft
How much concrete for a 10 × 20 slab?
A 10 × 20 foot slab 4 inches thick takes 2.47 cubic yards of concrete. Buy 2.72 cubic yards to allow 10% for spills and uneven ground: 123 bags of 80 lb, or a 2.75 cubic yard ready-mix order.
What to buy for a 10 × 20 ft slab, 4 in thick
2.72 cubic yards
73.33 cubic feet, or 2.08 cubic metres. Includes 10% extra for spills and uneven ground. Without it: 2.47 cubic yards.
Mix it from bags
123 bags of 80 lb
About $799.50. That is 9,840 lb to carry and mix.
Order ready-mix
2.75 cubic yards
About $412.50 before delivery fees. Rounded up to the next quarter yard, the way suppliers sell it.
Best for this job: over one cubic yard, a truck saves a lot of mixing.
| 40 lb bags | 245 |
|---|---|
| 50 lb bags | 196 |
| 60 lb bags | 163 |
| 80 lb bags | 123 |
The concrete weighs about 11,000 lb once poured.
The slab
- Area
- 200 square feet (18.58 m²)
- Round the edge
- 60 feet
- Corner to corner
- 22 ft 4 3/8 in
Measure both diagonals of your forms. When each one reads 22 ft 4 3/8 in, the corners are square.
A 10 × 20 slab at other thicknesses
Concrete for a 10 × 20 foot slab from 3 to 8 inches thick. The cubic yards and bags include 10% extra. The truck order is rounded up to the next quarter yard, and the weight is the finished slab.
| Thick | Buy, cu yd | 80 lb bags | Truck order, cu yd | Slab weighs, lb |
|---|---|---|---|---|
| 3 in | 2.04 | 92 | 2.25 | 7,500 |
| 4 in | 2.72 | 123 | 2.75 | 10,001 |
| 5 in | 3.40 | 153 | 3.50 | 12,500 |
| 6 in | 4.07 | 184 | 4.25 | 15,000 |
| 8 in | 5.43 | 245 | 5.50 | 20,000 |
Four inches is the standard thickness for residential slabs such as patios and walkways. Slabs that carry vehicles or heavy loads are poured thicker, and the thickness of anything load-bearing is set by your local building code.
If this slab is a patio or a driveway, the patio calculator and the driveway calculator ask the questions that job has and start from its usual thickness.
Bags or a truck for a 10 × 20 slab?
At 4 inches thick this slab takes 2.72 cubic yards with the extra, so order 2.75 cubic yards of ready-mix. That fits on one truck: a full truck carries about 10 cubic yards.
From bags it would be 123 bags of 80 lb, which is 9,840 lb (4.92 US tons) to lift and mix. It can be done with a mixer and help, but the truck pours the whole slab in one go. Ask about small-load fees, which many suppliers add to short orders.
What the concrete costs
Concrete only, at example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, before delivery fees. Labor, forms, base and steel are not included.
| Thickness | From bags | Ready-mix |
|---|---|---|
| 4 in | $799.50123 bags | $412.502.75 yd$2.06 a sq ft |
| 6 in | $1,196.00184 bags | $637.504.25 yd$3.19 a sq ft |
Prices differ a lot from one area to the next. Put your own in the concrete cost calculator.
The rest of the list for a 10 × 20 slab
What usually goes under, round and into a slab this size. Each amount includes 10% extra and is worked out for the settings in grey. Open an item’s calculator to change them.
- Gravel base3.9 US tons (2.72 cubic yards)4 in deep, crushed stone
- Form boards6 boards and 24 stakes12 ft boards round all four sides
- Rebar23 bars (455 ft)#4 bars, 20 ft long, 12 in apart both ways
- Wire mesh, instead of rebar6 sheets5 × 10 ft sheets, overlapped 6 in
- Vapor barrier1 roll, laid in 1 strip10 × 100 ft rolls
- Control joints1 joint to cut, 10 ft in all, making 2 panels of 10 × 10 ftJoints up to 10 ft apart
- Sealer2.2 gallons: 3 cans of 1 gallon2 coats at 200 sq ft a gallon
Not every slab needs every item. Whether yours needs steel, a vapor barrier or a thicker base depends on the ground, the load and your local code.
Questions people ask
How many yards of concrete do I need for a 10 × 20 slab?
A 10 × 20 foot slab 4 inches thick takes 2.47 cubic yards of concrete. With 10% extra for spills and uneven ground, buy 2.72 cubic yards. At 6 inches thick it is 4.07 cubic yards with the same extra.
How many bags of concrete do I need for a 10 × 20 slab?
At 4 inches thick you need 123 bags of 80 lb or 163 bags of 60 lb, including 10% extra. At 6 inches thick you need 184 bags of 80 lb or 245 of 60 lb.
How much does the concrete for a 10 × 20 slab cost?
At example prices of $6.50 for an 80 lb bag and $150.00 a cubic yard for ready-mix, a 4 inch slab costs about $799.50 in bags or $412.50 in ready-mix before delivery fees. Prices vary a lot by area, so put your own in the cost calculator.
How much does a 10 × 20 concrete slab weigh?
About 10,001 lb at 4 inches thick and 15,000 lb at 6 inches, at 150 lb per cubic foot for normal concrete.
Does a 10 × 20 slab need control joints?
Yes. At 4 inches thick, joints should be no more than about 10 feet apart, so a 10 × 20 foot slab gets 1 joint, which divide it into 2 panels of 10 × 10 feet.
Where the numbers come from
- Volume: length × width × thickness, in feet, divided by 27 for cubic yards. For this slab at 4 inches: 20 × 10 × 0.333 = 66.67 cubic feet, or 2.47 cubic yards.
- Bag yields: an 80 lb bag makes about 0.6 cubic feet and a 60 lb bag about 0.45 (ArcSite). Brands differ a little, so check the yield printed on your bag.
- Weight: 150 lb per cubic foot for normal concrete (Omni Calculator).
- Standard residential slab thickness: Concrete Network.
- Truck size: about 10 cubic yards for a full ready-mix truck (HomeGuide). Suppliers differ.
- Gravel: 105 lb per cubic foot for crushed stone (Select Sand & Gravel).
- Control joints: spaced up to 2.5 times the slab thickness in inches, read as feet (Concrete Network).
- Mesh and membrane overlap: 6 inches (DG Floors). Sealer coverage: 200 square feet a gallon (SealMaster); the label on your product decides.
Every number on this page is worked out by the same tested code as the calculators. Last reviewed 15 November 2026.